React T70 High Strength Studlock 10ml

Lockfast T70 High Strength Studlock / Threadlock is designed for the sealing and locking of threaded fasteners. The product is a single component anaerobic, high strength, acrylic based threadlocker. The product cures when confined in the absence of air between close fitting metal surfaces and prevents leakage and loosening from vibration and shock.

Lockfast T70 is particularly suitable for uses including stud bolts and dowels. Used also on other fasteners where maximum strength is required. This is a high strength adhesive designed to give maximum hold.

Directions for use
1. For optimum performance surfaces should be clean and free of grease.
2. If the material is an inactive metal consider using activator.
3. Shake the product thoroughly before use.
4. Apply several drops to the bolt & nut.
5. Assemble and tighten as required.
6. To prevent the clogging of the nozzle, do not let the tip
touch metal surface during application.

For disassembly
1. Use localized heat to bolt or nut, disassemble while hot.

For cleanup
1. To remove cured product use a combination of
solvent and abrasion such as a wire brush.

Manufacturer: Lockfast
Model:T70 – High Strength Studlock Threadlock